Ink-Jet system for non-contact single dot
marking applications (DOD)

The REA-JET EDS is a cost effective, high performance, one dot ink jet marking system designed to mark on a wide range of materials found in the modern manufacturing environment.

Capable of marking at high speeds and designed for use in the electronic industry as well as in harsh industrial environments such as dust, air humidity, vibration, large variations in temperature and aggressive substances.

The patented REA-JET EDS print head technology guarantees a high level of system availability and ease of use with little maintenance required.
The EDS processes a wide range of inks and colours, suitable for marking on a wide range of both "porous" and "non-porous" materials.
Designed for ease of integration into the manufacturing process environment the REA-JET EDS can be easily configured to work with PLC's or a Visual Inspection System.

The system can be used for a wide area of applications such as marking of mounting positions, production errors on products, applying soldering agent or marking of cutting lines. The EDS system allows to precisely apply liquids on a large variety of surfaces. Even mounted at linear motion devices and moved at a high speed does not create a problem for the system. Any mounting positions are possible. Due to small dimensions the EDS print head can be mounted in difficult to reach places also. Marking can take place from above, upside down and sidewise position.

The REA-JET EDS print head processes several inks such as water-based inks, solvent based inks, pigmented inks which make an excellent contrast on even difficult to mark substrates as well as curable naphta based inks for marking applications in the tire industry.

Easy maintenance and support are essential components of an industrial device. The REA-JET EDS components are rugged and modular. Sturdy connectors, for both electrical and fluidic connections are standard with the system. In the unlikely event that simple maintenance routines carried out by the operator do not resolve any system performance issues, a simple component replacement can be carried out by the operator with the minimum impact to the production cycle.

Print possibilities and technical data:

Printhead

• 1-nozzle marking head
• Nozzle size: 80µ, 130µ, 180µ, 270µ, 350µ

Dot frequency

• up to 800 dots/sec.

Print Options

• single dots
• dotted lines
• pulled through lines

Power supply

• 230/115V AC ±10% 50/60 Hz, 110VA

Operating environment

• Temperatures -5°C to +45°C
• Air humidity 10 - 90%, non-condensing

Dimensions

• Controller: 104 x 108 x 217 mm
• Marking head: 30 x 30 x 75 mm

Alterations reserved.

For further information of components please click on pictures on the right hand side.

To download brochure in PDF-Format please click here: Brochure (210KB)

Get Adobe Reader free of charge: download »

For further information please don't hesitate to get in contact with us.

Printsample:

Back to top of page.